You are not logged in. Please login or register.
Active topics Unanswered topics
Search options
Yes my projector dont support 240p (but support many different refresh rates) so I try to use GroovyMAME as a linedoubler with fake scanlines (I would need a CRT projector for hardware scanlines).
Just missing the black frames (and so I need to double the refresh rate) ;).
If I try with LCD monitor preset (mame.ini), I dont have the problem with black frame set to 1, but I just have 120Hz for all games, no more custom refresh rates (lcd range set to AUTO, if I try 100-130 switchres doesnt like).
I probably use GroovyMAME too differently that I'm supposed to, I'm just sharing my results :).
ok the problem happens with Black Frame Insertion set to 1.
Set to 0, MAME will use double refresh rate (exemple metal slug 3 run at 688x512p @118.371 Hz).
But the problem is that the game is too fast now and no black frame insertion. Is it possible to fix this ?
Thanks.
no more error message with 512 but mame wont load (infinite black screen loop)
it says : switchres :progressive line max 1024 out of range / error in monitor range (ignoring)
ok, for mame.ini or vmmaker or both ? :)
thanks for your precious informations
well 240p is not supported on the projector so I avoid
I would like to use 120hz + black frame insertion because I would like to see the difference :). Doing a quick check on this website http://www.testufo.com/#test=framerates giving me interesting results with the projector @120Hz.
now using these settings
vmmaker : MULTI
mame : pc_70_120
crt_range : 100-130
still no double refresh rate :/
note : I use scanlines effect, good enough @ 480p
So back to XP64 with a Radeon x1050 and my DLP.
This projector support many different resolutions / refresh rates but I prefer not to use to low resolution and use Groovymame as a "line doubler" (so a minimum of 640x480). The problem is that I was not able to use a refresh rate higher than 60hz.
You can see some pictures here.
I will would like to use 110~120Hz and enable black frame insertion.
Here my settings :
- monitor : pc_31_120
- crt_range0 : 50-130
- video : d3d
- syncrefresh : 1
vmmaker use pc_31_120 and minimum 480 lines for custom resolutions
Any idea ?
Thanks.
ok thanks for the infos
I think I will retry with a Radeon x600 and XP
Was doing my test on Windows 7 and HD 5450 (driver installed fine and Arcade_OSD report as CRTEmuDriver 1.2 found).
Does it mean that HD 5450 is also supported ?
Ok. As far I know, this DLP is 95 khz / 120 Hz compatible (but only for 720p) so the pc_70_120 preset should be fine ok.
Is there a know method to create "correct" presets ?
What will be the advantages if I use a Radeon card with CRT emu driver and this projector ?
Hi
I have a DLP a projector at home which support 120Hz and Black Frame Insertion up to 720p.
Which monitor preset should I use ?
Any point to use CRT_EmuDriver + Radeon on it ?
Thanks.
Hi all,
I already have a CRT groovymame setup and I would like to compare with an LCD setup.
What would the best setup to compare ?
LCD : low lag (less than 10ms)
CPU : Intel core i7 (is more than 1 core usefull ?)
GPU : a decent GPU (I heard that Intel HD4000 is not enough for HLSL), so maybe a cheap Geforce GTX
OS : Windows XP / 7 / 8 (any performance difference ?)
GROOVYMAME OPTIONS : ??? you tell me
Thanks.
Posts found: 11