1 Topic by virtuaperson

  • virtuaperson
  • Member
  • Offline

Topic: Display error after enabling EDID and plugging into CRT

This is what my CRT looks like after following the guide up to where I enable EDID and plug in the CRT. All the steps leading up to here seem to have worked fine. I have a Radeon HD 7000 series graphics card, going to a Trinitron.

https://imgur.com/a/fQSxBMI

My output is Analog_0 (the only Analog option for me), I have Extend Desktop Automatically unchecked, and the monitor type is set to Arcade 15.7 kHz.

Does anyone know what might be happening here?

2 Reply by virtuaperson

  • virtuaperson
  • Member
  • Offline

Re: Display error after enabling EDID and plugging into CRT

Also, I'm using this cable:
https://www.amazon.com/gp/product/B001O … 8&th=1

3 Reply by Calamity

  • Calamity
  • Administrator
  • Offline

Re: Display error after enabling EDID and plugging into CRT

Virtuaperson,

That cable won't convert RGB to component video. You need an RGB to component transcoder.